Lb-203 security camera focus fixed UV glue

Lb-203 is a one component UV curable acrylate adhesive. The product is specially designed for the bonding and covering protection of electronic components; the product has the characteristics of medium viscosity, fast curing speed and good weather resistance.

Product performance before curing

Colorless transparent viscous liquid

Viscosity (25 ℃, rotary viscometer) 6500-9500 MPa · s

(GB/T 2794-2013)

Specific gravity (@ 25 ℃) 1.08

(GB/T 13354-1992)

Curing conditions

The curing rate and depth of lb-203 depend on the light intensity, the spectral distribution of the light source, the irradiation time and the light transmittance of the bonded material. The following data were measured under the condition of high pressure mercury lamp producing 20 MW / cm2 UV radiation

Surface dry time 25

Deep curing time (1 mm, s) 4

Complete curing energy 800 MJ / cm2

Properties of cured products

The following data were measured after the accumulated energy of high pressure mercury lamp source was 800mJ / cm2

Hardness (d) 70-75

(GB/T 2411-2008)

Bonding strength of bonding substrate (1 cm2) (kg / cm2)

PC/PVC ≥ 2

Stainless steel / glass ≥ 4

Electrical performance

Dielectric constant (1MHz) 3.2

（GB/T 1409-2006）

Dielectric loss (1MHz) 0.03

（GB/T 1409-2006）

Dielectric strength (kV / mm) 20

（GB/T 1408,1-1999）

Surface resistivity (Ω) 6.2 × 1015

（GB/T 1410-2006）

Volume resistivity (Ω. Cm) 7.8 × 1015

（GB/T 1410-2006）

Weatherability test

The following data were measured after the accumulated energy of high pressure mercury lamp source was 800mJ / cm2

Base material test condition bond strength retention rate (%)

PC/GLASS 65℃ 90% RH (72H) 80

PVC/GLASS 65℃ 90% RH (72H) 75

Stainless steel / PVC ﹥ 65 ℃ 90% RH (72h) 82

Stainless steel / glass ﹥ 65 ℃ 90% RH (72h) 92

Storage conditions

Please store it in a cool and dark place. Please cover the bottle after opening the cap. Do not pour the glue back to the original bottle before using it. The best storage temperature is 8-28 ℃, too high or too low will affect the performance of the glue, and the shelf life is 8 months.

packing:

250G / bottle, 1000g / bottle can be packaged according to user's needs

explain

The above data are measured by lebei technicians in the laboratory for customers' reference. However, due to the different methods and conditions of each customer, it is suggested that customers find out the best process and method according to their own conditions, and the measured data shall prevail.